Job Type: 3rd Shift

  1. Home
  2. 3rd Shift
Maintenance Electrician

We are looking to hire an experienced Maintenance Electrician to look after the electrical system of our building. As a Maintenance Electrician, you will be required to conduct general maintenance inspections, perform routine electrical maintenance, respond to faults and wiring issues, and install major electrical appliances for the building.

Job Responsibilities:

  • Routinely inspecting electrical systems such as wiring, fixtures, and appliances.
  • Identifying faults or hazards.
  • Troubleshooting system failures.
  • Reviewing blueprints to understand wiring placement.
  • Testing of electrical systems with oscilloscopes, voltmeters, and ohmmeters.
  • Conducting maintenance repairs on old or faulty fixtures.
  • Responding to fault requests.
  • Providing suggestions for equipment replacement.
  • Writing electrical maintenance reports.
  • Installing new electrical appliances in the building.
  • Adhering to safety and performance standards.

Job requirements:

  • High school diploma or GED.
  • Electrician qualification certificate.
  • Proven work experience as a Maintenance Electrician.
  • Familiarity with industrial electrical systems and the National Electrical Code.
  • Good problem-solving skills.
  • Physically strong and able to stand for long periods.
  • Good communication skills.

Pay Rate: $34k-59k per year

Days/Hours (shift): Monday- Friday(8am-5pm)(3:30pm-11:30pm) 

*Hours are subject to change depending on workload, must be flexible.

General Labor

Employment type: Full Time

We are seeking candidates to work in a fast paced disinfectant wipes manufacturing company. Candidates must be reliable and have good work ethic.

Rapid growth Depending on initiative, and interest. We offer machine operator training.

Transportation is available.

Job Responsibilities:

  • Working on the line grabbing rolls of product, packing them, also requires putting cans and lids.
  • Keep the work area clean
  • Keep your hands clean at all times when handling the product.
  • Pay attention to details to make sure there is nothing wrong with the product or packages.

Job Requirements:

  • Must have and wear protective gear.
  • Must be able to stand for all of the regular shift as well as bend, reach and stoop.
  • Must be able to keep up with the production lines.
  • Must follow GMP’s as well as all food safety rules.
  • Must be able to lift 50 pounds consistently.
  • Must follow GMP’s as well as all food safety rules.

Pay Rate: 1st $11.00 2nd shift $11.00 3rd $ $11.00.

(Fast growth with increases in a month or less. Applies for all shifts)

Days/Hours (shift): Monday- Friday (6:00am – 2:00pm, 2:00pm to 10:00pm and 10:00pm to 6:00am).

*Some Saturdays are required depending on work load.

Food Manufacturing

Location: Milwaukee, WI

Employment type: Full-Time

We are looking for a Production Team Member to join a fast-growing food manufacturing company. Reporting to the Production Supervisor this person will assist in the production of delicious pretzel bread!

Job Responsibilities:

  • Complete a variety of manual labor tasks in the production of baked goods.
  • Monitor product quality according to company standards (proper size, color, cut, texture, packaging, etc).
  • Physically move, push, and/or handle product, materials, and equipment (racks, pans, product, etc.).
  • Addressing production issues with line operator.
  • Understand and execute lock out tag out (LOTO) procedures.
  • Complete standard sanitation tasks as assigned.
  • Perform housekeeping and maintenance tasks to keep the production area clean, organized, and safe.
  • Work with Production Supervisor and other production team members to manage production workflow.
  • Monitor and continuously make improvements to meet and exceed company standards.
  • Understand and promote Miller Baking’s Quality Management Systems including SQF, HACCP, and GMPs to ensure safety and quality of employees and products.
  • Support, demonstrate and promote Miller Baking Co.’s core values: Stability, Going the Extra Mile, Curiosity, Humility
  • Perform all duties as assigned.

Job Requirements:

  • Previous experience in a plant production environment and/or in drug, food, or beverage manufacturing preferred.
  • Ability to lift and move up to 50 pounds.
  • Available to work 12-hour shifts.
  • Must be able to read and write.
  • Ability to work in a fast-paced environment.
  • Available for shift rotation or flexible shift rotation schedule as required.
  • While performing the essential functions of this position, the employee is regularly required to talk and hear.  This position requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing in environments with varied temperatures.
  • Must be 18 years or older.

Pay Rate: $ 1st shift 11.25, 2nd $11.75, 3rd 12.25

Days/Hours (shift): Monday- Saturday. 1st shift 6:00am to 4:30pm, 2nd 3:30pm to 2:30am and 3rd 8:00pm to 6:30am

*Hours are subject to change depending on work load, must be flexible as days off change on a weekly basis.

Packaging

Employment type: Long term

We are seeking candidates to work in a fast paced food manufacturing company. Candidates must be reliable and have good work ethic.

We provide transportation.

Job Responsibilities:

  • Packaging cheesecakes
  • Washing trays that have been used
  • Keeping work area clean
  • Keeping hands clean at all times when handling product

Job Requirements:

  • Must have and wear protective gear
  • Must be able to stand for all of the regular shift as well as bend, reach and stoop
  • Must be able to keep up with the production lines
  • Must follow GMP’s as well as all food safety rules

Pay Rate: 1st $11.00, 2nd and 3rd $12.00 per hour

Days/Hours (shift): Monday- Friday 1st shift 6:30am to 3:00pm-2nd shift 3:00pm to 11:00pm -3rd shift 11:00pm-7:00am).

*Hours are subject to change depending on work load, must be flexible as days off change on a weekly basis.

Injection Molding

Location: Sussex, WI

Employment type: Full-Time/Temp to Hire

Safely operates injection molding press machines to meet specified production and quality standards. Includes the assembly, inspection and packaging of parts as well as performing secondary operations as needed.

Job Responsibilities:

  • Operates automatic and semi-automatic molding machines. Observes operation of machines and promptly notifies Supervisor, Team Leader or technician whenever problems occur to ensure that output is per standard.
  • Takes part from press and trims excess material as needed to meet the customer’s agreed-upon quality standards.
  • Examines molded product for any quality defects based on product standards and written instructions to assure that defective parts are not packed.  Notify technicians and Team Leader of problems in a timely manner.
  • Performs secondary operations as required to produce parts to customer’s agreed-upon standards.  This includes, but is not limited to, hot stamping, drill presses, gluing, cutting and assembly.
  • Puts excess material and unsatisfactory parts in regrind container to be collected and recycled by the Grinder.
  • Meets specified production rate as stated on work order for cost-effectiveness and to meet customer deadlines.
  • Packs only acceptable finished product to specifications on work order. Make, seal and label boxes or stack on skids as instructed to accommodate shipping needs.
  • Completes the operator ticket accurately to document work completed during the shift to assure accurate production and inventory records.
  • Responsible for putting the first shot of the shift at the end of the press on the center shelf of the product standard shelves for the Team Leader.  This must be done as soon as the Operator gets to the press at the beginning of the shift– the same time that the production ticket is being filled in for the start count.
  • Maintains a safe working environment to minimize the possibility of an injury.  Reports any unsafe conditions to supervisor.
  • Maintains area in a clean and orderly manner to create a pleasant and productive work environment.
  • Assists with the training of temporaries and new employees as necessary.
  • Performs other duties as assigned.
  • Uses good interpersonal communication techniques to work with co-workers.  Is courteous and helpful when interacting with fellow employees.   Helps to create a pleasant work environment.
  • Learns, practices and supports all Lean Manufacturing tools to assist the Company in the continuous improvement process. Lean Manufacturing tools include 5S, Six Sigma, Single Minute Exchange of Dies (SMED), Total Productive Maintenance (TPM), and Value Stream Mapping (VPM).

Job Requirements:

  • Must have the equivalent of a high school diploma preferred.
  • Must be able to perform basic math skills.
  • Ability to lift up to 30 lbs. to shoulder height preferred.
  • Good attendance and punctuality at previous jobs

Pay Rate: $11.50

Days/Hours/Pay rate: Monday-Friday 

1st shift 7:30am to 3:30pm $10.50

2nd shift 3:30pm to 11:30pm 10.75

3rd shift 11:30pm-7:30am- $ 11.50

*Occasional Overtime offered but not required.

Maintenance Mechanic

We are looking for a skilled Maintenance Mechanic to install, repair, and maintain machinery and equipment. The Maintenance Mechanic’s responsibilities include performing regular inspections of machinery and equipment, carrying out preventative maintenance, and fulfilling other duties such as building maintenance as assigned

Job Responsibilities:

  • Assembling, installing, and maintaining mechanical systems, machinery, and equipment.
  • Troubleshooting machinery and performing routine preventative maintenance.
  • Reading, interpreting, and following instructions and operation manuals.
  • Maintaining a schedule for inspecting, servicing, and testing machinery.
  • Cleaning, repairing and installing equipment and parts as needed.
  • Operating a variety of hand and power tools.
  • Maintaining a clean and organized work area.
  • Complying with health and safety regulations.
  • Performing general maintenance work on buildings as assigned.

Job requirements:

  • High school diploma/GED.
  • 2+ years of experience as a Maintenance Mechanic or in a similar role.
  • Trade or vocational school graduation preferred.
  • Knowledge and ability to operate hand and power tools.
  • Mechanical aptitude and ability.
  • Strong computer skills.
  • Physical dexterity.
  • Good troubleshooting skills.
  • Knowledge of health and safety regulations.

Pay Rate: $16-29 per hour

Days/Hours (shift): Monday- Friday(8am-5pm)(3:30pm-11:30pm) 

*Hours are subject to change depending on workload, must be flexible.

//relistaff.com/wp-content/uploads/2021/03/reliable-staffing-solutions-final-logo-reverse.png

Milwaukee’s Best General Labor and Semi Skilled Staffing Company.

1215 S Cesar E Chavez Dr Milwaukee, WI 53204

info@relistaff.com

(414) 293-9015

Job Alerts

Enter your email address here always to be updated. We promise not to spam!

Enter your email address here always to be updated. We promise not to spam!

© Copyright 2023 All Rights Reserved

en_USEnglish
es_MXSpanish en_USEnglish