1st Shift Archives - Page 3 of 6 - Reliable Staffing Solutions

Injection Molding

Location: Sussex, WI

Employment type: Full-Time/Temp to Hire

Safely operates injection molding press machines to meet specified production and quality standards. Includes the assembly, inspection and packaging of parts as well as performing secondary operations as needed.

Job Responsibilities:

Operates automatic and semi-automatic molding machines. Observes operation of machines and promptly notifies Supervisor, Team Leader or technician whenever problems occur to ensure that output is per standard.
Takes part from press and trims excess material as needed to meet the customer’s agreed-upon quality standards.
Examines molded product for any quality defects based on product standards and written instructions to assure that defective parts are not packed. Notify technicians and Team Leader of problems in a timely manner.
Performs secondary operations as required to produce parts to customer’s agreed-upon standards. This includes, but is not limited to, hot stamping, drill presses, gluing, cutting and assembly.
Puts excess material and unsatisfactory parts in regrind container to be collected and recycled by the Grinder.
Meets specified production rate as stated on work order for cost-effectiveness and to meet customer deadlines.
Packs only acceptable finished product to specifications on work order. Make, seal and label boxes or stack on skids as instructed to accommodate shipping needs.
Completes the operator ticket accurately to document work completed during the shift to assure accurate production and inventory records.
Responsible for putting the first shot of the shift at the end of the press on the center shelf of the product standard shelves for the Team Leader. This must be done as soon as the Operator gets to the press at the beginning of the shift– the same time that the production ticket is being filled in for the start count.
Maintains a safe working environment to minimize the possibility of an injury. Reports any unsafe conditions to supervisor.
Maintains area in a clean and orderly manner to create a pleasant and productive work environment.
Assists with the training of temporaries and new employees as necessary.
Performs other duties as assigned.
Uses good interpersonal communication techniques to work with co-workers. Is courteous and helpful when interacting with fellow employees. Helps to create a pleasant work environment.
Learns, practices and supports all Lean Manufacturing tools to assist the Company in the continuous improvement process. Lean Manufacturing tools include 5S, Six Sigma, Single Minute Exchange of Dies (SMED), Total Productive Maintenance (TPM), and Value Stream Mapping (VPM).

Job Requirements:

Must have the equivalent of a high school diploma preferred.
Must be able to perform basic math skills.
Ability to lift up to 30 lbs. to shoulder height preferred.
Good attendance and punctuality at previous jobs

Pay Rate: $11.50

Days/Hours/Pay rate: Monday-Friday

1st shift 7:30am to 3:30pm $10.50

2nd shift 3:30pm to 11:30pm 10.75

3rd shift 11:30pm-7:30am- $ 11.50

*Occasional Overtime offered but not required.

Packaging

Location: Waukesha

Employment type: Full Time

We are seeking candidates to work in packaging a fast paced food manufacturing company. Candidates must be reliable and have good work ethic.

Transportation is available

Job Responsibilities:

Packaging all kind of nuts.( Peanuts, Almonds , Pecans etc)
Dumping product to the machines.
Keeping work area clean.
Keeping hands clean at all times when handling product.

Job Requirements:

Must be able to stand for all of the regular shift as well as bend, reach and stoop
Must be able to keep up with the production lines
Must follow GMP’s as well as all food safety rules
Must be able to lift 50 pounds consistently
Must follow GMP’s as well as all food safety rules.
Drug test required

Pay Rate: 1st $11.00 and 2nd shift $ $11.50

Days/Hours (shift): Monday- Friday (6:00am – 2:30pm) (1:00pm- 9:30pm)

*Hours are subject to change depending on work load, must be flexible as days off change on a weekly basis.

Sanitation Worker

Location: Waukesha

Employment type: Long Term.

We are seeking candidates with sanitation experience preferably with background in food manufacturing. Candidates must be reliable, have a good work ethic and be available for overtime.

We provide transportation.

Job Responsibilities:

Must be able to set-up and clean equipment
Responsible for sanitizing equipment to avoid cross contamination
Make sure all equipment is put away where it belongs
Make sure machines are properly labeled when they should not be used

Job Requirements:

Must have and wear protective gear
Must be able to stand for all of the regular shift as well as bend, reach and stoop
Must be able to lift at least 30 pounds consistently
Must follow GMP’s as well as all food safety rules

Pay Rate: $12.75 per hour

Days/Hours (shift): Monday- Saturday (7:00pm-3:30am)

*Hours are subject to change depending on work load, must be flexible.

Maintenance Mechanic

We are looking for a skilled Maintenance Mechanic to install, repair, and maintain machinery and equipment. The Maintenance Mechanic’s responsibilities include performing regular inspections of machinery and equipment, carrying out preventative maintenance, and fulfilling other duties such as building maintenance as assigned

Job Responsibilities:

Assembling, installing, and maintaining mechanical systems, machinery, and equipment.
Troubleshooting machinery and performing routine preventative maintenance.
Reading, interpreting, and following instructions and operation manuals.
Maintaining a schedule for inspecting, servicing, and testing machinery.
Cleaning, repairing and installing equipment and parts as needed.
Operating a variety of hand and power tools.
Maintaining a clean and organized work area.
Complying with health and safety regulations.
Performing general maintenance work on buildings as assigned.

Job requirements:

High school diploma/GED.
2+ years of experience as a Maintenance Mechanic or in a similar role.
Trade or vocational school graduation preferred.
Knowledge and ability to operate hand and power tools.
Mechanical aptitude and ability.
Strong computer skills.
Physical dexterity.
Good troubleshooting skills.
Knowledge of health and safety regulations.

Pay Rate: $16-29 per hour

Days/Hours (shift): Monday- Friday(8am-5pm)(3:30pm-11:30pm)

*Hours are subject to change depending on workload, must be flexible.

Electrical Assembler/Panel Wirer

We are seeking an Electrical Panel Wirer who is responsible for panel wiring and field routing of wire harness to motor, heater, sensors, etc. as well as proper grounding practices / device grounding practice

Job Responsibilities:

Operate machinery, equipment, and computer terminals
Test, Troubleshoot and correct panel
Make sure wires are tie wrapped and neatly inserted in enclosures.
Complete electrical panels on time
Machine wiring “a huge plus”
Visually inspect and reject parts outside of written specifications
Effectively wire a variety of products that range from standardized design and function to non-standard products
Operate within standard operating procedures (SOPs), position overview, wiring diagrams, schematics, blue prints, and work instructions
Use proper tools as needed to crimp wires and create harnesses
Complete daily production and quality logs and labor cards

Job requirements:

High school diploma or equivalent, with a preference for trade school training and/or 1+ years of related experience
Experience using Electrical Schematics
Proven electrical and mechanical aptitude
Knowledge of Quality inspection principles
Use of hand tools, power tools, and electrical testing equipment
Self-starter and willing to accept new challenges

Pay Rate: $16-20 per hour

Days/Hours (shift): Monday- Friday(8am-5pm)(3:30pm-11:30pm)

*Hours are subject to change depending on work load, must be flexible.

Mig Welder

We are searching for a reliable, deadline-driven MIG Welder to join our team of skilled professionals. The MIG Welder’s responsibilities include interpreting blueprints, selecting appropriate tools and metals, measuring and assembling metal pieces, using cutting tools, determining gas ratios, drilling holes, and monitoring inventory. You should be able to observe health and safety regulations at all times and report any issues to the line manager.

To be successful as a MIG Welder, you should demonstrate excellent physical strength and dexterity, as well as superb attention to detail. Outstanding MIG Welders are able to interpret written and verbal specifications and stick to deadlines even under extreme conditions.

Job Responsibilities:

Selecting, measuring, cutting, and joining appropriate metals to specifications.
Preparing metals and work surfaces to ensure safe and effective assemblage.
Interpreting specifications and blueprints accurately.
Training welding apprentices and mentoring recruits.
Regularly cleaning and inspecting welding equipment and tools.
Operating cranes and other machinery to transport materials to welding worksites.
Determining correct gas ratios.
Testing the strength of each join during and after project completion.
Diagnosing issues and troubleshooting as required.
Liaising with the line manager or supervisor, reporting any issues, and making suggestions for improvement.

Job requirements:

High school diploma or similar.
A completed apprenticeship or vocational training.
A relevant certificate from a welding association may be required.
Excellent stamina, strength, and dexterity.
Ability to remain calm and focused under pressure.
Sound understanding of welding safety.
The ability to teach would be advantageous.
A willingness to learn and work overtime when required.

Pay Rate: $14-20 per hour

Days/Hours (shift): Monday- Friday(8am-5pm)(3:30pm-11:30pm)

Page Topline

Job Type: 1st Shift

Injection Molding

Packaging

Sanitation Worker

Maintenance Mechanic

Electrical Assembler/Panel Wirer

Mig Welder

Page Copyright